Digimerge DH100 Series Bedienerhandbuch PDF herunterladen (Seite 44)

32

Using the Main Menu

CAMERA SETUP

Configure camera color and

brightness properties and camera

name.

To configure the Camera Setup menu:

1. Click the channel number you wish to

c

onfigure.

2. Configure the following:

• Mask:

Select the checkbox to blank out the

channel. The channel continues to record,

but you will not be able to see the channel.

• Sharpness, Brightness, Contrast,

Saturation, Hue: Click -/+ to increase or

decrease the values.

• Name: Enter the desired channel name.

• Volume (channel 1 only): Adjust the

volume input level. You must connect an

audio input device to the DVR’s Audio IN

port (i.e self powered microphone or

audio-enabled camera (not included)).

3. Right-click and click Ye

s to save your

settings.

PTZ SETUP

Configure PTZ camera settings.

To configure the PTZ setup menu:

1. Click on the channel number that the PTZ

c

amera connects to.

2. Configure the following:

• Enabl

e PTZ: Select the checkbox to enable

the PTZ camera.

• Protocol: Select the PTZ camera’s

protocol.

• PTZ ID: Enter the PTZ ID.

• Baud Rate: Enter the PTZ baud rate.

NOTE: Refer to your PTZ camera

manufacturer for configuration details.

3. Right-click and click Ye

s to save your

settings.

Controlling the PTZ camera

To control your PTZ camera:

1. Double-click the channel that the PTZ

c

amera connects to, so that you are in full

screen mode.

2. Right-click and click PTZ Contr

ol.

3. Use the PTZ controls to manipulate the

ca

mera.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare