Digimerge D4202 Bedienungsanleitung

Digimerge Technologies Inc.lP Video Router & TLR-DVR ControllerModels: D4202 Installation / User Manual

4. Set the program shortcut setting and press “Next”.5. Press “Next” to begin copying the files6. After the installation, the following files listed b

STEP 2: IP SETTING1. Using the Crossover LAN cable connect the Video Web Server to the PC. Note : In some operating environments, users might need th

4. Click on “INTERNET PROTOCOL (TCP/IP)” and then select “Properties” to setup5. Click on “Use the following IP address” and set the IP address and su

3. When you see the control bar, this means that you have successfully logged into theprogram on the Video Web Server. Click on “System Config” to set

6. Disconnect the PC and Video Web Server, and link the static IP to the RJ-45 video web server.Static IPSTEP 4: DVR REMOTE SETTING1. Connect the DV

STEP 5: PIN CONFIGURATIONSAfter the remote setting, connect the DVR, noting the following pins. PIN 1, 6. RS485-A, RS485-BUse RS485-A & RS485-B s

STEP 6: CONNECTING TO A PC VIA THE INTERNET1. Change the PC network setting to the original setting and link the PC to the internet.2. Click

STEP 1: SOFTWARE INSTALLATION – DYNAMIC IP SETTING:Follow the same procedure as outlined on Page 6 & 7 for the Static IP SettingSTEP 2: SYSTEM RES

2. Click on “Create Account”3. Register your information (Username, E-mail address & password). Click on“Create Account” when the necessary inform

6. Click on“Account” and “Add Host”7. Users can set up their own DDNS HOST. For example, the user’s Host name is “avtech.dyndns.org”. Click on “Add H

CAUTIONRISK OF ELECTRIC SHOCK. DO NOT OPEN.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PART

2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is Win2000 or Win 2003, the setup procedure is similar to that of

4. Click on “INTERNET PROTOCOL (TCP/IP)” and then select “Properties” to setup5. Choose “Obtain an IP address automatically”6. Enter the “Command Prom

8. Close the window above. Enter the IP address ( router’s gateway: 192.168.1.1 ) to log in to the router from the Internet Explorer. Enter the login

1. Click on “INTERNET PORT” and choose your WAN type (e.g. PPPoE). Enter your“User Name” and “Password” to dial up the dynamic IP address. Press savea

4. In the “ADVANCED SETUP / Dynamic DNS”, key in the “DNS Account”, “UserName” and “Password” that you applied in step 3. Press save after you set up

1. To configure the Server IP, please click twice to enter the setup.2. Key in the User Name, Password, and IP address (The default settin

3. When you see the control bar, you have successfully logged into the program on theVideo Web Server. Click on “System Config” to set up.SYSTEM CONFI

1. Connect the DVR and monitor.2. In the “Remote” setting, set the baud rate and ID the same as the “Peripheral” settingon the video web server. Set

DVRADSL modem(WAN end)2. Click twice and enter your User name, Password and host on the VideoWeb Server. (Note : If you did not change the

Step 1: Click twice to enter the Login setup (please refer to “software installation”)Step 2: Key in “User Name” and “ Password”. (e.g. “User Name”

CONTENTS:GENERAL PRECAUTIONS---------------------------------------------------------------------------------------INTRODUCTION & FEATURES -------

CONTROL PANEL AND BASIC OPERATION1. Image transmission rate per second2. Video Channels3. Data transmission rate4. Connection/Disconnection5. Resoluti

You will find the recorded file on the PC. Click twice to playback.1. On Screen Display2. Snapshot3. Stop4. Pause5. Slow (1/2, 1/4, 1/8)6. PLAY7. Fast

Click on “System Config” for advanced setting.1. You can get all the information, Server IP, Gateway, Net Mask & DNS, from yourISP company.2. Web

1. You can get all the data from your MISdepartment.2. The default uploading port is No.21. 3. You can set the uploading directory by yourself.When t

You can modify the storing path for the recording file and snapshot images .1. Firmware Version : For the current firmware version, you can click on

1. With regards to direct connection to a PC, could I connect the video server withremote PC without connecting it to the Internet ?ANS: Yes, you can

SPECIFICATIONSCPU: 16 Bits RISC Processor, ROM: 512K Bytes Flash, RAM: 8M Bytes SDRAMHardwareOne RJ-45 for 10/100 Mbps Ethernet, LED to indicate Link/

GNDALARM INPUT 2ALARM INPUT 1ALARM INPUT 3NORMAL LOWALARM INPUT 4NORMAL HIGHRS485-BRS485-AEXTERNAL ALARM NOEXTERNAL ALARM COMRS485-ARS485-BRS232-TXRS2

2) Set the “Remote” function on the DVR. NOTE : Remote mode : RS-485, Baud rate : selectable, ID : same as “PeripheralControl” in the Video Web Serve

1) Connect the Sub-D plug on the Video Web Server with the COM/NO ports of theSensor.2) Set the “Mail setting” item in the system configure. NOTE 1 :

GENERAL PRECAUTIONS:1. Read InstructionsAll of the safety and operating instructions shouldbe read and understood before the product is used.2. Retain

Step 2 : Click on “Download Windows AP” to download the application program and save“Setup.exe” in the HDD.Step 1 : Please connect the PC to the Inter

Static IP1. In step 2.5 : Please make sure that your IP address is 192.168.1.XXX. Thesetting of “XXX” could be set from 1 to 254, where 10 is exclude

Warranty : Subject to the exclusions and limitations below, Digimerge warrants to the initial end-user purchaser that the product will be free from de

CARE AND MAINTENANCE:Please follow these instructions to ensure proper care and maintenanceof this systemKeep your monitor and camera dry. If it gets

Digimerge Technologies Inc.300 Alden RoadMarkham OntarioL3R 4C1www.digimerge.com

INTRODUCTION & FEATURES:IntroductionThank you for purchasing the IP Video Router and TLR-DVR Controller. This is an internet based digital video

PACKAGE CONTENTS:-3-IP Video Router & TLR-DVR Controller Owner’s Manual & CDCHECK YOUR PACKAGE TO MAKE SURE THAT YOU RECEIVED THE COMPLETE SY

CONTROL - REAR PANEL:-4-1. LANConnect the RJ45 standard pass through cable to the internet, or directly to a PC usingthe crossover cable2. ACT &

-5-HARDWARE CONNECTION AT SERVER SITE:A . Connection StructureNOTE: The RS-485 to control the DVR is optional.1. Connect the video output of the came

-6-STEP 1: SOFTWARE INSTALLATION – STATIC IP SETTING:1. Put the attached CD into the CD-ROM. The application program will install on your PC.Note: The